1

1

1

Products


Water-swelling sealant

Water-swelling rubber waterstop It is made by mixing high-molecular inorganic water-absorbing and swelling materials with rubber, and it is also a new type of building waterproof material. After contacting water, it can absorb water and swell, with a maximum expansion rate of 250% to 550% (adjustable), compacting the gaps between new and old concrete to form a waterproof plastic colloid. In addition to having all the properties of a waterstop, it also uses an inner waterproof line made of special rubber for water-swelling projects. In this way, after the expansion rubber swells when it encounters water, the tightness between the waterstop and the structure is enhanced, making the waterproof and waterstop effect better.

 

Performance and application of water-swelling rubber waterstop:

In addition to the properties of ordinary rubber waterstops, the main feature of water-swelling rubber waterstops is that the inner waterproof line is made of special rubber for water-swelling projects. In this way, after the expansion rubber swells when it encounters water, the tightness between the waterstop and the structure is enhanced, making the waterproof and waterstop effect better. The rubber material in the expansion waterproof line section complies with GB18173.3-2002. The physical and mechanical properties of the remaining rubber are the same as those of ordinary rubber waterstops, complying with GB18173.2-2000. Physical properties of rubber material (GB/T18173.3-2002)

After water swelling, the water-swelling rubber waterstop increases the tightness between the waterstop and the structure, thereby improving the waterstop and waterproof performance. Therefore, the water-swelling rubber waterstop solves the problem of circumferential leakage that has plagued people for a long time. This product has been widely used in more than 360 key projects nationwide, with good results. This product is mainly used in the construction joints and deformation joints of cast-in-place concrete during concrete pouring, becoming one with the concrete structure, such as underground facilities, tunnels, water conveyance aqueducts, dams, liquid storage structures, etc. Rubber waterstops sometimes need to be used with two-component polysulfide building waterproof sealant. It utilizes the high elasticity and compression deformation characteristics of rubber to produce elastic deformation under various loads, thereby effectively tightening and sealing, preventing water leakage and seepage of building structures, and providing shock absorption and buffering.

This type of waterstop can be used in the concrete construction joints of underground structures to effectively and thoroughly solve the problem of water leakage in construction joints. It is a substitute for rubber waterstops. It is widely used in various projects such as basements, caverns, mines, bridges, tunnels, subways, sewage treatment plants, dams, and reservoirs. In addition to having all the properties of rubber waterstops, it also uses an inner waterproof line made of special rubber for water-swelling projects. In this way, after the expansion rubber swells when it encounters water, the tightness between the waterstop and the structure is enhanced, making the waterproof and waterstop effect better. Therefore, it solves the problem of circumferential leakage that has plagued people for a long time. This product has been widely used in more than 250 key projects nationwide, with good results.

In 2006, the emergence of numerous expressways and high-rise buildings in China led to the widespread use of water-swelling waterstops. With its scientific waterstop mechanism, low market price, and convenient installation and construction, it has been widely used in various civil engineering and water conservancy projects. With the increasing requirements for engineering waterproofing, in order to ensure that the gaps in underground civil engineering do not leak and that there is a quick and easy way to make up for any leakage, our company has newly developed a water-swelling waterstop that can be pre-grouted.

 

Usage of water-swelling rubber waterstop:

The rubber material in the expansion waterproof line section of the water-swelling rubber waterstop complies with GB18173.3-2002. The physical and mechanical properties of the remaining rubber are the same as those of ordinary rubber waterstops, complying with GB18173.2-2000. Physical properties of water-swelling line rubber material (GB/T18173.3-2002). After the previous section of concrete is poured, the construction joint interface is hardened and surface-dried, the interface dross is removed, and the waterstop is attached to the construction joint interface using the waterstop's own viscosity along the direction of the construction joint. For vertical construction joints, steel nails can be used for fixation to prevent displacement. When joining, the waterstops can be attached side by side and fastened with lead wire, and then the next section of construction can be carried out.

 

Main performance indicators of water-swelling rubber waterstop:

1. Maximum water absorption expansion rate 150%-300%. 2. High temperature 150℃ does not flow. 3. Low temperature -25℃ does not become brittle.

4. Water pressure resistance 20×30mm can reach 1.5mpa or more. All performance indicators have passed national-level testing.

 

Installation and construction methods of water-swelling waterstop:

1. Keep the concrete interface of the rubber waterstop flat and dry. Before installation, remove the interface dross, dust, and debris, and fix the waterstop to the determined installation location using steel nails or adhesive. However, the surface with the grouting pipe must be placed on the original concrete interface.

2. When connecting the waterstops, use the parallel lap method, and no break points should be left in the middle. The waterstops at the connection should be reinforced with steel nails, and the reserved grouting connection pipe on the waterstop should be inserted into the equal other waterstop to connect the two-way connection.

3. According to the length of the installed waterstop, install a three-way connection at approximately every thirty meters. The two straight ends of the three-way connection should be inserted into the waterstop, one end inserted into the grouting connection pipe, and the other T-shaped end should be inserted into the spare grouting, in case of seepage in the gap, chemical grouting can be used to stop the water.

4. The grouting connection pipe in the connected waterstop must be firmly bonded to the three-way connection fitting, and the grouting pipe of the installed waterstop must be completely unobstructed. The spare grouting pipe installed on the three-way connection should be placed in the inner wall direction.

5. Each box contains a bottle of grouting pipe adhesive (used when connecting the grouting pipe to the two-way and three-way connections on the waterstop), and a spare grouting pipe to be placed in the inner wall on the three-way connection.

The water-swelling waterstop uses the world's most advanced pre-prepared chemical grouting system concept. It integrates the waterstop mechanism of slow-swelling water-swelling waterstop and the advantages of convenient installation and pre-grouting positive remediation to develop a new waterstop product. This product is inexpensive and easy to install. Under normal conditions, it relies on the expansion of the waterstop itself to stop water. If water leakage occurs in the gap, it is not necessary to open grooves and drill holes on the structural surface for leak plugging. The pre-prepared grouting pipe can be directly used to inject chemical slurry, which is evenly filled into the water leakage area, thus quickly plugging the water leakage, saving time and cost, and achieving the purpose of permanent waterstop. The grouting pipe type water-swelling waterstop is suitable for construction joints, later-placed belts, settlement joints and other building joints in high-grade underground waterproof projects. The waterstop with grouting pipe can increase the installation strength of the waterstop, making it easier to install and control its expansion direction, and the elongation of the waterstop in the longitudinal direction.

The grouting pipe water-swelling waterstop adopts the world's advanced pre-prepared chemical grouting system concept. It integrates the waterstop mechanism of slow-swelling water-swelling waterstop and the advantages of convenient installation and pre-grouting positive remediation to develop a new product. The waterstop mechanism is scientific, inexpensive, and easy to install. Under normal conditions, it relies on the expansion of the waterstop itself to stop water. If water leakage occurs in the gap, it is not necessary to open grooves and drill holes on the structural surface for leak plugging. The pre-prepared grouting pipe can be directly used to inject chemical slurry, which is evenly filled into the water leakage area, thus quickly plugging the water leakage, saving time and cost, and achieving the purpose of permanent waterstop. It is suitable for construction joints, later-placed belts, settlement joints and other building joints in high-grade underground waterproof projects. The waterstop with grouting pipe can increase the installation strength of the waterstop, making it easier to install and control its expansion direction, and the elongation of the waterstop in the longitudinal direction.

online message

Submit Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.

Copyright: Zhejiang Shunhao New Material Co., Ltd. COPYRIGHT©BY SHUNHAONew Materials (zhejiang) Co., Ltd.