1

Mixing/Rubber Products
Telephone:
0571-88620153/88627090
Fax:
0571-88627317
Rubber anticorrosive lining
Telephone:
0571-88672316/88627088
Fax:
0571-88670771

Products

Home page

Self-vulcanized butyl rubber lining features

QH series self-vulcanized rubber lining can solve many troubles of your large-scale equipment on-site anti-corrosion lining

Temperature resistance -40~130°C

QH series room temperature self-vulcanized butyl rubber lining is a high-performance anti-corrosion and easy-to-construct special rubber lining made of German LANXESS (formerly Bayer) rubber material, suitable for chemical corrosion protection of large chemical containers. The traditional rubber lining must be heated to be vulcanized, and the construction cost is high (must be equipped with a series of equipment and facilities required for vulcanization), subject to construction conditions, and energy consumption, and quality problems such as bubbling are likely to occur during vulcanization. In particular, the dynamic performance of the hard rubber lining is poor, often due to thermal expansion and contraction of the container or when the container is subjected to collision deformation, lining cracks, breakage and falling are likely to occur, causing corrosion; the application range of the lining is narrow, only in the case Use below 80 °C.

QH series butyl rubber lining does not need to be heated and vulcanized. It can be vulcanized under natural conditions. The construction process is simple and convenient, and it is not limited by the size of the container, structure and construction site. Moreover, the lining has good elasticity, wear resistance, and dynamic performance, and the corrosion protection is safe and reliable.

QH series butyl rubber lining can be used in many sectors of the national economy, especially in the smelting plant, steel plant, chemical industry, fertilizer, electronic power, food, paper, textile printing and dyeing, transportation, pharmaceutical, environmental protection and other key equipment. The lining can meet the anti-corrosion requirements of various acid, alkali and salt solution storage tanks, storage tanks and reaction tanks below 130 °C.

Physical and chemical corrosion properties of QH series butyl rubber lining
Hardness, Sauer A	65±5
Tensile Strength，MPa	≥6.0
Elongation at break，%	≥350
Break permanent deformation，%	≥40
Bond strength to steel, 180° peel, kg/25mm	≥20
Acid and alkali resistance;	Quality change　△W,%	Volume change　△V,%
60%H2 SO4　　　　　RT×10days	<0.5	<0.5
40%H2 SO4　　　　　80℃×10days	<1.0	<1.0
25%H2 SO4　　　　　RT×10days	<0.2	<0.5
25%NaOH　　　　　　RT×10days	<0.5	<0.5
30%HF　　　　　　　RT×10days	<2.0	<2.0
40%H3PO4　　　　　 RT×10days	<0.2	<0.2
30%HCI　　　　　　 RT×10days	<3.0	<4.0
70%H2SO4　　　　　 RT×10days	<0.5	<0.5
40%FeCI3　　　　　 40℃×10days	<3.0	<3.0
20-75%H2SO4　　　　130℃×360days	<2.7

Natural rubber lining series

Butyl rubber lining series

Natural rubber lining series

Butyl rubber lining series

online message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.