1

1

1

Products


Halogen-free flame-retardant cable jacket compound

TC1202 125℃ Halogen-Free, High-Flame-Retardant Compound

I. Description

This material uses EVM (ethylene-vinyl acetate copolymer) as the base material and is specifically designed for the production of low-smoke, halogen-free, flame-retardant wires and cables. It is widely used in wire and cable companies in European countries such as Germany, the UK, and France, and has the characteristics of being halogen-free, low-smoke, highly flame-retardant, and oil-resistant. Because this material's vulcanization system does not contain free sulfur, it will not react with copper to produce copper sulfide, so the copper wire will not be affected by blackening and its performance will not be affected.

 

II. Applications

It can be used as insulation for medium and low-voltage wires and cables or as a sheath for other cables. Cables made from this material can be used for a long time at temperatures between -25℃ and 125℃. It is used in the production of motor leads, locomotives, vehicles, subways, oil platforms, ships, nuclear power plant cables, or cables used in similar situations. The material is white, but other colors can be provided according to customer requirements. In addition, this material has high flexibility, which can reduce the bending radius of the cable, making it easier to install and lay.

 

III. Properties

Item Typical Value Item Typical Value
Original Tensile Strength N/mm2
Elongation at Break %
11.0
180
Oxygen Index % 45
158℃ 168h Air Oven Aging
Tensile Strength Retention %
Elongation at Break Retention %
110
90
PH Value
Conductivity μs/mm
7.2
1
100℃ 70h Immersion in ASTM #2 Oil
Tensile Strength Retention %
Elongation at Break Retention %
70
75
Breakdown Voltage KV/mm
Volume Resistivity at 20℃ Ω·cm
22
5×1013
70℃ 168h Immersion in #0 Diesel
Tensile Strength Retention %
Elongation at Break Retention %
60
60
Mooney Viscosity 1+4, 100℃
Mooney Scorch ts, 120℃
Vulcanization 180℃
55
8.8
15
-25℃ Low Temperature Elongation % 35 Specific Gravity g/cm3
Shore Hardness
1.58
85

 

IV. Processing Technology

It is recommended to use a CV (continuous vulcanization) production line for extrusion production.

Extruder Compression Ratio: 1.1:1~1.5:1 Length-Diameter Ratio: 6:1~16:1

Temperature: 50~70℃

Vulcanization Temperature: The recommended temperature inside the vulcanization pipe should not be lower than 200℃

 

V. Packaging and Storage

25kg per bag, the material is in the form of a film, and it should be stored in a clean, dry, cool, and ventilated warehouse.

The technical advice provided by our company, whether verbally, in writing, or through testing, is given in good faith, but is not guaranteed. Users are also responsible for testing the products supplied by our factory to verify their suitability for the intended process and application.

online message

Submit Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.

Copyright: Zhejiang Shunhao New Material Co., Ltd. COPYRIGHT©BY SHUNHAONew Materials (zhejiang) Co., Ltd.